CHAUVET
12‑UNIT ROAD CASE FOR CHAUVET OVATION F‑55WW SPOTLIGHT
$391.93This road case is designed for twelve CHAUVET Ovation F‑55WW fixtures, the compact LED inkie Fresnel‑style spotlights used in studios, theatres, and short‑throw applications. The top hinged lid opens quickly, revealing a foam‑lined interior with more than 110mm of EVA padding at the bottom to help isolate vibration during transport. Dividers made from 9mm plywood keep each fixture separated and stable. A rear accessory compartment provides space for cables, clamps, and handles, keeping everything organized in one place. With solid wheels, recessed handles, and a compact footprint, the case moves easily through venues and truck packs. It’s built for crews who need a practical, protective, and efficient way to transport multiple small spotlights without slowing down the workflow.
2‑UNIT ROAD CASE FOR CHAUVET MAVERICK STORM 2 PROFILE
$1,489.33This road case is designed for two CHAUVET Maverick Storm 2 Profile fixtures, the large and heavy LED yoke profiles known for their bright output and big moving heads. Because these fixtures are not exactly “light”, the case uses both a top and a front hinged lid, making loading and unloading far easier than a traditional top‑only design. The front lid includes pockets for bracket clamps and even a small wheel at the bottom to help it open smoothly. Inside, thick foam surrounds the fixtures to keep them secure during transport. With solid wheels, recessed handles, and a compact footprint, the case moves easily through venues and truck packs. It’s built for crews who want a practical, safe, and efficient way to transport heavy profile fixtures.
2‑UNIT ROAD CASE FOR CHAUVET ROGUE R3 BEAM LED FIXTURE
$1,026.50This road case is designed for two CHAUVET Rogue R3 Beam fixtures, the heavy LED beam units known for their bright output and big moving heads. Since these fixtures aren’t exactly “grab‑and‑go,” the case uses a hinged top lid for quick access and easier loading. Inside, thick EVA foam surrounds the fixtures to help isolate vibration and reduce shaking during transport. A dedicated accessory compartment on the right side includes extra EVA padding underneath to keep cables and clamps from shifting around. With solid wheels, recessed handles, and a compact footprint, the case moves smoothly through venues and truck packs. It’s built for crews who want a practical, organized, and protective way to transport heavy beam fixtures without slowing down the workflow.
ROAD CASE FOR 3‑UNIT CHAUVET COLORADO PXL BAR 16 LED BATTEN
$961.39This road case is designed for three CHAUVET COLORado PXL Bar 16 fixtures, the one‑meter‑long pixel‑mappable LED battens known for their motorized tilt and bright RGBW output. The top hinged lid opens quickly, revealing a foam‑lined interior that keeps each fixture secure. A detachable foam block on the lid adds extra protection while making loading and unloading faster. On the right side, a dedicated accessory space gives you room for cables, clamps, and other essentials. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast setups.
ROAD CASE FOR 4‑UNIT CHAUVET COLOR STRIKE M LED STROBE
$842.96This road case is designed for four CHAUVET Color STRIKE M fixtures, the large and heavy LED strobe/wash units known for their tilting heads and high‑output versatility. The top hinged lid opens quickly, revealing a foam‑lined interior that keeps each fixture secure. EVA bars beneath the lights help isolate vibration during transport, and a dedicated 110mm‑wide accessory compartment at the front provides room for cables, clamps, and other essentials. A label dish on the lid makes identification easy during busy load‑ins. With solid wheels, recessed handles, and a low‑profile design, the case moves smoothly through venues and truck packs. It’s built for touring crews who want their fixtures protected, organized, and ready for fast setups.
ROAD CASE FOR 4‑UNIT CHAUVET COLORADO PXL BAR 16 LED BATTEN
$1,035.63This road case is designed for four CHAUVET COLORado PXL Bar 16 fixtures, the one‑meter‑long pixel‑mappable LED battens known for their motorized tilt and bright RGBW output. The top hinged lid opens quickly, revealing a foam‑lined interior that keeps each fixture secure. A detachable foam block on the lid adds extra protection while making loading and unloading faster. On the right side, a dedicated accessory space with a 109mm width gives you room for cables, clamps, and other essentials. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast setups.
ROAD CASE FOR 4‑UNIT CHAUVET OVATION CYC 3 FC LED LIGHT BAR
$1,299.14This road case is designed for four CHAUVET Ovation CYC 3 FC fixtures, the long and heavy cyclorama wash lights that crews rely on for stage coverage and footlight applications. The hinged top lid opens to reveal a padded interior with widened gaps between each fixture, making it easier to grab them without wrestling for space. A solid plywood accessory basket sits above the lights, offering room for cables, clamps, or anything else that travels with the fixtures. Divider slots let you customize the basket layout, and handle‑cut holes make lifting it simple. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. Foam lining throughout keeps the fixtures protected, making this a practical and touring‑friendly storage solution.
ROAD CASE FOR 8‑UNIT CHAUVET COLORADO PXL BAR 8 LED BATTEN
$1,065.32This road case is designed for eight CHAUVET COLORado PXL Bar 8 fixtures, the long and heavy pixel‑mappable LED battens known for their motorized tilt and punchy RGBW output. The top hinged lid opens quickly, giving you full access to a foam‑lined interior that keeps each fixture secure. EVA bars beneath the battens help isolate vibration during transport, and a dedicated accessory section on the right side provides room for cables, clamps, or anything else that travels with the lights. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast load‑ins.
ROAD CASE FOR CHAUVET PXL CURVE 12 LED BATTENS
$1,268.71This road case is built specifically for the CHAUVET COLORado PXL CURVE 12, a long and heavy pixel‑mappable LED batten that deserves more than a casual ride in the truck. Designed to hold three units, the case features both a top and side hinged lid, making loading far easier than the usual “lift and pray” approach required by top‑only cases. Thick foam surrounds the fixtures to keep them safe, and the truck‑friendly footprint means it stacks neatly with other touring gear. With solid wheels and well‑placed handles, it moves smoothly even when fully loaded. Whether you’re prepping for a concert tour or a busy season of live events, this case keeps your lighting battens protected and ready to roll.