Shop
ROAD CASE FOR 4‑UNIT CHAUVET COLORADO PXL BAR 16 LED BATTEN
$1,035.63This road case is designed for four CHAUVET COLORado PXL Bar 16 fixtures, the one‑meter‑long pixel‑mappable LED battens known for their motorized tilt and bright RGBW output. The top hinged lid opens quickly, revealing a foam‑lined interior that keeps each fixture secure. A detachable foam block on the lid adds extra protection while making loading and unloading faster. On the right side, a dedicated accessory space with a 109mm width gives you room for cables, clamps, and other essentials. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast setups.
ROAD CASE FOR 4‑UNIT CHAUVET OVATION CYC 3 FC LED LIGHT BAR
$1,299.14This road case is designed for four CHAUVET Ovation CYC 3 FC fixtures, the long and heavy cyclorama wash lights that crews rely on for stage coverage and footlight applications. The hinged top lid opens to reveal a padded interior with widened gaps between each fixture, making it easier to grab them without wrestling for space. A solid plywood accessory basket sits above the lights, offering room for cables, clamps, or anything else that travels with the fixtures. Divider slots let you customize the basket layout, and handle‑cut holes make lifting it simple. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. Foam lining throughout keeps the fixtures protected, making this a practical and touring‑friendly storage solution.
ROAD CASE FOR 4‑UNIT GLP FUSION STICK FS16 Z LED BATTEN
$1,173.13This road case is designed for four GLP FUSION Stick FS16 Z fixtures, the long and heavy RGBW LED battens known for their pixel‑mapped output and rugged build. The top hinged lid opens quickly, revealing a foam‑lined interior that keeps each fixture secure. A dedicated accessory space on the right side provides room for cables, clamps, and other essentials. Thick foam around the fixtures and on the lid helps protect the battens during transport while making loading and unloading straightforward. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast setups.
ROAD CASE FOR 4‑UNIT GLP IMPRESSION X4 BAR 20 LED BATTEN
$1,110.33This road case is designed for four GLP Impression X4 Bar 20 fixtures, the long and heavy motorized LED battens known for their precise tilt movement and bright 20‑pixel output. The top hinged lid opens quickly, revealing a foam‑lined interior that keeps each fixture secure. A detachable foam block on the lid, held in place with a Velcro strip, adds extra protection while making loading and unloading faster. Two accessory spaces—one on each side—provide room for cables, clamps, and other essentials. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast setups.
ROAD CASE FOR 6‑UNIT TOURPRO STADIUM PAR 18IP LED PAR LIGHT
$1,082.48This road case is designed for six TourPro Stadium Par 18IP fixtures, the compact outdoor‑rated LED Par lights used in concerts, live events, and video‑recorded productions. The hinged top lid opens quickly, revealing six EVA‑lined slots shaped to hold each fixture with its R5001E clamp and filter still attached. The foam inserts help isolate vibration during transport, keeping the lights stable and protected. A rear accessory compartment provides space for additional filters and small items. With solid wheels, recessed handles, and a compact footprint, the case moves easily through venues and truck packs. It’s built for crews who need a practical, organized, and protective way to transport multiple Par lights without juggling loose fixtures.
ROAD CASE FOR 8‑UNIT CHAUVET COLORADO PXL BAR 8 LED BATTEN
$1,065.32This road case is designed for eight CHAUVET COLORado PXL Bar 8 fixtures, the long and heavy pixel‑mappable LED battens known for their motorized tilt and punchy RGBW output. The top hinged lid opens quickly, giving you full access to a foam‑lined interior that keeps each fixture secure. EVA bars beneath the battens help isolate vibration during transport, and a dedicated accessory section on the right side provides room for cables, clamps, or anything else that travels with the lights. With solid wheels, recessed handles, and a low‑profile design, the case moves easily through venues and truck packs. It’s built for touring crews who want their battens protected, organized, and ready for fast load‑ins.
ROAD CASE FOR CHAUVET PXL CURVE 12 LED BATTENS
$1,268.71This road case is built specifically for the CHAUVET COLORado PXL CURVE 12, a long and heavy pixel‑mappable LED batten that deserves more than a casual ride in the truck. Designed to hold three units, the case features both a top and side hinged lid, making loading far easier than the usual “lift and pray” approach required by top‑only cases. Thick foam surrounds the fixtures to keep them safe, and the truck‑friendly footprint means it stacks neatly with other touring gear. With solid wheels and well‑placed handles, it moves smoothly even when fully loaded. Whether you’re prepping for a concert tour or a busy season of live events, this case keeps your lighting battens protected and ready to roll.
ROAD CASE FOR CM LODESTAR D8+ ELECTRIC CHAIN HOIST
$814.91This road case is designed for a single CM Lodestar D8+ electric chain hoist, including Models J, L, JJ and LL. These hoists are powerful, heavy, and not exactly something you casually carry around, so the case uses a hinged top lid for quick loading and unloading. Thick EVA foam at the bottom helps isolate vibration during transport, and a rear accessory compartment provides space for chains, bags, and rigging essentials. The base features engraved CM logos on both sides for easy identification. With solid wheels—two braked and two non‑braked—and recessed handles, the case moves smoothly through warehouses, loading docks, and truck packs. It’s built for rigging teams who need a reliable, organized, and protective way to transport a single heavy hoist.
ROAD CASE FOR DOUBLE GLP JDC2‑IP LED HYBRID STROBE FIXTURE
$1,014.36This road case is purpose‑built for safely transporting two GLP JDC2‑IP LED Hybrid Strobe Fixtures, the kind of medium‑sized but surprisingly heavy units that touring crews know all too well. The case uses a top‑hinged lid for easy loading, with thick foam lining wrapped around each fixture to keep them snug on the road. Inside, you’ll also find dedicated storage for JDC2‑IP light filters, including two foam‑lined compartments and two additional pockets. With solid wheels, reinforced hardware, and truck‑friendly dimensions, the case is ready for the demands of concert touring and live events. Whether you’re moving GLP units or similar fixtures from other brands, this case keeps everything organized, protected, and easy to handle.
ROAD CASE FOR LAFIMA PA-SPB-0024-000 24INCH BAROQUE TIMPANI
$1,289.66This road case is purpose‑built for the Lafima PA-SPB-0024-000, a 24inch beautifully crafted baroque timpani that deserves more than a casual ride in the back of a truck. Designed with a top‑entry hinged lid, it makes loading and unloading surprisingly easy for an instrument of this size. Inside, a generous layer of professionally arranged foam keeps the timpani snug and protected from bumps, shakes, and the occasional over‑enthusiastic stagehand. The case rolls smoothly on durable wheels and features truck‑friendly dimensions, making transport far less dramatic than the performances the timpani is meant for. Whether used for touring, storage, or venue‑to‑venue travel, this case keeps your instrument safe and ready for the next show.
ROAD CASE WITH FRONT OPEN LID & RAMP FOR ADAMS PRO GEN2 26″ TIMPANI
$225.75Introducing our premium workstation road case, featuring a sleek black honeycomb finish and EVA foam padding. Designed to securely hold up to 4 x 24-inch monitors, it includes a removable front table
Samsung 75″ Series 7 RU7100 4K UHD TV Road Case
$1,993.00This road case is designed to safely transport and protect the Samsung 75″ Series 7 RU7100 4K UHD TV during storage, handling, and transit. Built for a large-screen television, it helps shield the display from impact, vibration, and travel damage while keeping the unit organised and ready for installation.